收費島鋼模具 安全島島頭加工定制 建信廠家

安全島鋼模具拋光性能好所以對模具行腔內壁要求很高粗糙度非常小以適應塑

料表面良好光澤度的要求對此對模腔一般要進行拋光處理表面越亮越好為此

要求模具材料易于拋光所以選用的材料不應該有雜質和氣孔等缺陷

收費島鋼模具 安全島島頭加工定制 建信廠家安全島模具

安全島鋼模具基本知識模具規格一般為長度4米的采用3部分主體結構所以

該模具是一種組合形式的這樣能夠保證整體現澆的方便性使用鋼板厚度為面板4

毫米筋板5毫米這樣在重復使用的時候不會發生變形的現象

Safe island mold, safe island steel mold polishing performance is good 

therefore the mold row cavity inner wall request is very high, the 

roughness is very small, in order to adapt to the plastic surface good 

gloss request, regarding this, generally must carry on the polishing 

treatment to the mold cavity, the surface is brighter the better, for this 

reason, mold materials are required to be easy to Polish, so the materials 

selected should not have impurities and pores and other defects. Safety 

Island Mold, Safety Island Steel Mold Basic Knowledge: Mold specifications 

are generally 4 meters in length, using 3 parts of the main structure, so 

the mold is a combination of the form, so as to ensure the convenience of 

the whole casting; The thickness of the steel plate is 4 mm for the face 

plate and 5 mm for the rib plate, so that the deformation will not occur 

when the steel plate is reused.