收費島形狀是根據目前用于高速公路進出口的島頭島端和中間底座部件制成的

 收費島鋼模一般采用現場澆鑄技術以減少次數 裝卸費用 收費島型鋼型

材基礎知識型材規格一般為4米長主體結構為三部分所以型材為組合型可

提供一般現場成型的方便 鋼板厚度為4mm加強筋為5mm重復使用時不變形

收費島模具應按圖紙制作相鄰鋼板絞合在一起以增加立柱強度和穩定性軸

的放置應提前完成 在地質任務中大地測量非常重要可以使施工更加方便

收費島模具必須用脫模劑進行預處理然后安裝 該鋼量規應提供干凈水平和

堅固的地板表面 同時澆注時必須安全可靠 這種類型的表格被傳輸 需要

注意的是不同規格的鋼模具不能混用因為它們零件的性能和尺寸也不同

收費島模具現場組裝固定完成后工人在其中涂抹機油加以保護隨后放入管道

進行混凝土的注入工作經過多道工序的操作混凝土會慢慢凝固成型這樣收

費島完成了澆注工作由此可見各類模具的作用無非就是用來對混凝土水泥等

砂漿完成塑形工作本身流動性超強的砂漿凝固就是一件難事而使用鋼材質模

具進行幫助的話大部分的模具都是鋼板生產并不會有著變形問題可以放心操

作

The shape of toll island is made according to the island head, island 

end and middle base components currently used for Expressway import and 

export. The steel formwork of toll Island generally adopts in-situ 

casting technology to reduce the number of times. Handling charges. 

Basic knowledge of profile steel of toll Island: the profile 

specification is generally 4m long, and the main structure is three 

parts, so the profile is combined, which can provide the convenience of 

general on-site forming; The thickness of the steel plate is 4mm and 

the stiffener is 5mm. It will not deform when reused. The toll Island 

mould shall be made according to the drawing, and the adjacent steel 

plates shall be twisted together to increase the strength and stability 

of the column. The shaft shall be placed in advance; In geological 

tasks, geodesy is very important, which can make construction more 

convenient. The toll Island mold must be pretreated with release agent 

and then installed. The steel gauge shall provide a clean, level and 

firm floor surface. At the same time, the pouring must be safe and 

reliable. This type of table is transferred. It should be noted that 

steel molds of different specifications cannot be mixed because their 

parts have different properties and sizes.

After the toll Island mold is 

assembled and fixed on site, the workers apply engine oil to protect 

it, and then put it into the pipeline for concrete injection. After 

multiple processes, the concrete will slowly solidify and form, so that 

the pouring of the toll island is completed. It can be seen that the 

function of all kinds of molds is nothing more than to complete the 

molding of concrete, cement and other mortar. It is difficult to 

solidify the mortar with strong fluidity. If steel molds are used for 

help, most molds are produced by steel plates and will not have 

deformation problems, so they can be operated safely.